NEC Univerge NEAX 2000 IPS Command Manual page 82

COMMAND CODE TITLE:
04
1ST DATA
Y
DATA
01 09 SMDR Message Format of Center
Office for Centralized Billing-
CCIS
[Series 3400]
10 Control method for PMS
[Series 3400]
10 00 A-law/µ-law for the Main Site
[For EU]
[Series 3200 R6.2 (R6.2)]
NOTE 1: When using PN-CP24-A/PN-CP24-B/PN-CP24-C/PN-CP24-D/PN-CP27-A/PN-CP27-B, set the 2nd
data to 3 and set the A-law/µ-law by the SW2-1.
NOTE 2: When using PN-CP31-A/PN-CP31-B/PN-CP31-C/PN-CP31-D, the system is set to µ-law automatically.
Set the 2nd data to 0 for A-law.
NOTE 3: Set the same value as Remote Site (CM04 Y=11-25). You cannot set both of A-law and µ-law in the same
Remote PIM over IP.
NOTE 4: When CM04 Y=10>00 is set to 3, A-law/µ-law setting is decided in the following order.
1. Setting by Key ROM
2. Setting of SW2-1 of the MP
LANGUAGE INDICATED ON D
PURPOSE OF CALLER ID SENDER, CONNECTION PORT FOR MCI
MEANING
term
/ATTCON/DESKCON LCD,
2ND DATA
DATA MEANING
00 Extended NEAX 2400 IMS Format
15 Former NEAX 2400 IMS Format
0 MP
1 PN-AP00-B/PN-AP00-D with
MRCA program
3 PN-AP00-B with AP00 program
0 A-law
1 µ-law
2 Not used
3 Depends on the SW2-1 on PN-
CP24-A/PN-CP24-B/PN-CP24-C/
PN-CP24-D/PN-CP27-A/PN-
CP27-B or the Key ROM (SP-3722
IPS KYUS PROG-A1) on PN-
CP31-A/PN-CP31-B/PN-CP31-C/
PN-CP31-D
– 58 –
CM04
: Initial Data
RELATED
COMMAND
Continued on next page
NWA-008844-001 Rev.5.0
91ch3001.fm
JUNE/01/2007