NEC Univerge NEAX 2000 IPS Command Manual page 152

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE
624 Alternative Routing when the MB switch of IPT/IP-PAD card is
ON/LAN cable of IPT/IP-PAD card is pulled out in tandem
office or when all outgoing trunks of tandem office are make
busy condition
[Series 3600]
626 In ETSI ISDN Overlap Receiving, whether the system connects
to the calling party when the system does not receive the fol-
lowing DID number within the time set by CM41 Y=0>109,
after the first DID number of the calling party is received
[For EU]
[Series 3200 R6.2 (R6.2)]
627 In ETSI ISDN Overlap Receiving, whether the system connects
to the calling party when the DID number of digits received
from ISDN is more than the maximum number of digits
assigned by CM85 Y=0-7
[For EU]
[Series 3200 R6.2 (R6.2)]
628 Link Reconnect-Peer-to-peer CCIS
[Series 3300]
NOTE: This command is effective when CM08>606 is set to 1.
629 Connected line number indication on ATTCON/DESKCON
display in ETSI ISDN Connected Line Identification Presenta-
tion (COLP)
[For EU]
[Series 3300]
633 Trunk access code display when a call terminates via ETSI
ISDN
[For EU]
[Series 3300]
644 ETSI ISDN Overlap Sending
[For EU]
[Series 3300]
BASIC SERVICE FEATURES
0
1
0
1
0
1
0
1
0
1
0
1
0
1
BRT INITIAL
DTI INITIAL
– 128 –
: Initial Data
SETTING DATA
To provide (CGC sending)
Not provided (CFL sending)
Not connected
To connect
Not connected
To connect
To provide
Not provided
Not provided
To provide
Available
Not available
To provide
Not provided
Continued on next page
NWA-008844-001 Rev.5.0
NOVEMBER/15/2006
CM08
91ch3001.fm