NEC Univerge NEAX 2000 IPS Command Manual page 108

COMMAND CODE TITLE:
06
1ST DATA
Y
DATA
10 XX ZZ D channel path between CSI
and CSH
XX : AP number (04-15, 20-
31) of PN-SC03-A/PN-
SC03-B/PN-SC03-C
ZZ : D-channel block num-
ber (00-03)
NOTE: Since one PN-4CSIA/PN-4CSIA-A card uses 16 LT ports for two LT slots, CM06 Y=10 must be set to each
slot.
Example: When mounting the PN-4CSIA/PN-4CSIA-A card in the LT00 slot of PIM0, set the LEN for
17 00-07 VIPT (Voice channel for
H.323 IPT) number
18 XX ZZ D channel path between CSI
and CSH
XX : AP number (04-15, 20-
31) of PN-SC03-A/PN-
SC03-B/PN-SC03-C
ZZ : D-channel block num-
ber (00-03)
[Series 3200 R6.2 (R6.2)]
NOTE 1:
When mounting PN-2CSIH, assign the CS/ZT number to the first LEN (Level 0) of each LT slot. Assign-
ment of the CS/ZT number to the third LEN (Level 2) is not necessary.
NOTE 2:
When mounting PN-4CSIA/PN-4CSIA-A, assign the CS/ZT number to the first LEN (Level 0) of PN-
4CSIA/PN-4CSIA-A card mounting slot and the adjoining right side slot. Assignment of the CS/ZT
number to the third LEN (Level 2) is not necessary.
AP CARD ALLOCATION
MEANING DATA
X YY
NONE
LT00 slot and LT01 slot.
CM06 Y=10 (1) XX00
(1) XX01
04-15,
20-31
NONE
000-255
NONE
2ND DATA
MEANING
X : PIM number (0-7)
YY : Port number (00-56)
First LEN (Level 0) of PN-2CSIA/
PN-2CSIA-A/PN-2CSIH/
PN-4CSIA/PN-4CSIA-A:
X00, X08, X16, X24, X32, X40,
X48, X56
No data
(2) 000
(2) 008
AP number (04-15, 20-31) of PN-
IPTB
No data
CS/ZT number of PN-2CSIA/
PN-2CSI-A/PN-2CSIH/
PN-4CSIA/PN-4CSIA-A set by
CM10/CM14
No data
– 84 –
CM06
INITIAL
: Initial Data
RELATED
COMMAND
CM05
CM10
CM05
CM05
CM10/CM14
NWA-008844-001 Rev.5.0
91ch3001.fm
NOVEMBER/15/2006