NEC Univerge NEAX 2000 IPS Command Manual page 159

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE
825 Number of digits for a sequence used to communicate with the
PMS
[Series 3400]
826 Timing that the system sends a recovery process request to the
PMS
[Series 3400]
827 Parity check for MP Built-in SMDR on IP
[Series 3400]
828 Kind of parity for MP Built-in SMDR on IP
[Series 3400]
830 Kind of Center Office for Centralized Billing-CCIS
[Series 3400]
NOTE: This command is available in following conditions.
- Output Message Format of SMDR: NEAX 2400 IMS Extended Format
- Local Office: 2000 IPS
835 Printing of each hotel feature record with the printer that is
connected to the PMS using the PN-AP00-B/PN-AP00-D card
(with MRCA program)
[Series 3600]
836 System clock used for the SMDR output of outgoing/incoming
call
[Series 3600]
837 System clock used for the SMDR output of station-to-station
call
[Series 3600]
839 Sending of OAI SMFN with intermediate information via OAI
queue
[Series 3600]
BASIC SERVICE FEATURES
0 3 digits (000-199)
1 2 digits (00-99)
0 At every connection establishment
1 At the first connection establishment
only since system initialization
0 None parity
1 Parity as for CM08>828
0 Odd parity
1 Even parity
0 2000 IPS
1 2400 IPX
0 Available
1 Not available
0 System clock of site that the seized
trunk is accommodated (for outgoing
call)/System clock of site that the ter-
minated trunk is accommodated (for
outgoing call)
System clock of Main Site
1
0 System clock of the site that the
seized trunk/calling station is accom-
modated
1 System clock of Main Site
0 To send
1 Not sent
– 135 –
: Initial Data
SETTING DATA
Continued on next page
NWA-008844-001 Rev.5.0
91ch3001.fm
JUNE/01/2007
CM08