NEC Univerge NEAX 2000 IPS Command Manual page 242

COMMAND CODE TITLE:
12
Y
No. MEANING
17 TAPI ADAPTER mode
INITIAL
[Series 3200 R6.1
(R6.1)]
NOTE 1: When using D
NOTE 2:
When the TAPI ADAPTER is not used, set "3".
NOTE 3: For PN-2DLC/4DLC cards, this data must be assigned to the first LEN (Level 0) of each card.
For PN-8DLC cards, this data must be assigned to the first LEN (Level 0) and fifth LEN (Level 4) of
each card.
Characteristic of LLC (PN-
4LLCB) Card
INITIAL
NOTE: When using Series 3600 software or later, a reset of the MP card is not required after this command for
LLC card is set/changed.
When changing the data with online, the data is valid after the LLC card is unplugged and plugged in with
two seconds or more interval. (When using DLC card, a reset of the MP card is required.)
STATION CLASS-1
DATA
0 D
Series E)
[Soft Key is not available]
3 Not used
term
65 TAPI ADAPTER on D
1 Long distance
3
Short distance
SETTING DATA
MEANING
term
65 TAPI ADAPTER on D
term
75, set "0".
– 218 –
: Initial Data
RELATED
COMMAND
term term
75 (D CM12 Y=22
Continued on next page
NWA-008844-001 Rev.5.0
DECEMBER/02/2005
CM12
91ch3002.fm