NEC Univerge NEAX 2000 IPS Command Manual page 762

COMMAND CODE TITLE:
EA
1: Fault Kind No./Restoration Kind No. (Continued)
RESTORATION
KIND NUMBER
17
18
19
30
31
32
34
[Australia Only]
35
36
38
3B
3C
50
51
52
53
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
Key FD Activation (Center Activation)
FP/AP card returned to normal condition
Power failure returned to normal condition
DTI line returned to normal condition
DCH/BRT/PRT D-channel link connection returned to normal condition
CCH link connection returned to normal condition
CCH/IPT link connection returned to normal condition
[Series 3300 software required]
Number of faulty trunks was less than predetermined number
Number of lookout stations was less than predetermined number
DLC card returned to normal condition
SMDR output buffer memory returned to normal condition
CS/ZT returned to normal condition
LAN application returned to normal condition
Traffic of IP network returned to normal condition from limit bandwidth excess
Traffic of IP network returned to normal condition from warning bandwidth excess
Communication error restoration between Main Site and Remote Site
SIP returned to normal condition
RESTORATION CONTENT
[Series 3600 software required]
– 738 –
CMEA
Continued on next page
NWA-008844-001 Rev.5.0
91ch3008.fm
DECEMBER/02/2005