NEC Univerge NEAX 2000 IPS Command Manual page 510

COMMAND CODE TITLE:
5A
(2) For Multi-site Roaming Visitor PS
[North America/Latin America]
COMMAND
CODE
CM12 Y=00 DTMF/DP
CM13 Y=18 Reverse signal sending to station
CM30 Y=00 Trunk route allocation
CM30 Y=02 Terminating system in Day Mode
CM30 Y=03 Terminating system in Night Mode
CM30 Y=40 Terminating system in Mode A
CM30 Y=41 Terminating system in Mode B
NOTE 1: The trunk route data must be assigned by CM35, because the trunk route data are not auto-
matically assigned.
The trunk route of the Virtual Trunk is 63 by the default data setting. Be sure to assign the
separate trunk route number of Virtual Trunk for Home PS and Visitor PS by CM30 Y=00.
NOTE 2:
The second data of CM30 Y=02, 03, 40, 41 are set to "4" (Direct-In Termination) automat-
ically by CM5A Y=00.
Be sure to change these data to "22" (Roaming Termination), for Roaming service.
VIRTUAL LINE-VIRTUAL TRUNK PATH SETTING/ASSOCIATION OF
VIRTUAL PS STATION/WLAN VIRTUAL STATION NUMBER AND PS
STATION/WLAN STATION NUMBER
MEANINGS 1ST DATA 2ND DATA
Virtual Station 1
No. assigned by
CM10/CM14
Virtual Station 0
No. assigned by
CM10/CM14
Virtual Trunk No. 63
256-511
Virtual Trunk No. 04
256-511
Virtual Trunk No. 04
256-511
Virtual Trunk No. 04
256-511
Virtual Trunk No. 04
256-511
– 486 –
INITIAL
MEANING
DP
Send
NOTE 1 Trunk Route No. 63
NOTE 2 Direct-In Termination
NOTE 2 Direct-In Termination
NOTE 2 Direct-In Termination
NOTE 2 Direct-In Termination
NWA-008844-001 Rev.5.0
CM5A
91ch3005.fm
JULY/01/2006