NEC Univerge NEAX 2000 IPS Command Manual page 504

COMMAND CODE TITLE:
57
DATA TABLE:
Y
No. MEANING
00 Group No. 0-7
07
10 Group Call No. 00-19
29
30 Specification of the
My Line number that
displays the calling
number
[Series 3600]
NOTE:
The number of stations that can display the calling number on LCD is maximum 8 per tenant. Set the
allocation number to the stations that displays the calling number.
NOTE 1: Assign the following participant numbers as the first data.
• 8-Party Conference : 00-06
• 16-Party Conference : 00-14
• 32-Party Conference : 00-30
NOTE 2:
X=0-9, A (*), B (#), C (fixed pause), D (programmable pause).
NOTE 3: The maximum number of simultaneous calling for single line stations/PSs/WLAN Stations is
12 per FP. When the number of single line stations/PSs/WLAN Stations exceeds 12, allocate
the rest of stations to another FP. For a D
above.
32-PARTY CONFERENCE/GROUP CALL
1ST DATA
DATA MEANING
00 Participant No. 00-30
30
00 Serial No. 00-31
within the group
31
XX YY XX : Tenant No. 00-63
YY : Allocation No.
00-07
DATA
X-XX...XX
NOTE 1
(Maximum
16 digits)
NOTE 2, 3
X-XXXXXXXX
NONE
NOTE 3
X-XXXXXXXX
term
(My Line/Virtual Line), there is no limit as the
– 480 –
: Initial Data
2ND DATA
MEANING
Participant station number
Trunk Access Code and partici-
pant number
LCR Access Code and partici-
pant number
Station No. assigned by CM10/
CM14
Virtual Station No./WLAN Vir-
tual Station No. assigned by
CM14
No data
My Line No.
NWA-008844-001 Rev.5.0
91ch3005.fm
JANUARY/20/2006
CM57