NEC Univerge NEAX 2000 IPS Command Manual page 359

COMMAND CODE TITLE:
31
Y
DATA
7 01 Received Backward GB signals on DOD
MFC call
15 [Not used in Australia/
North America]
01: Backward GB-1 signal
15: Backward GB-15 signal
8 01 Received Backward GC signals on DOD
MFC call
[Not used in Australia/
15
North America]
01: Backward GC-1 signal
15: Backward GC-15 signal
NOTE:
9 01 Forward GII signal to terminate DID MFC
call to Attendant Console
15 [Not used in North America]
01: Forward GII-1 signal
15: Backward GII-15 Signal
NOTE:
MFC/MF-ANI TRUNK DATA
1ST DATA
MEANING
INITIAL
INITIAL
Backward GC signals are used
only when CM08>474, 477: 0.
Effective only when CM08>020: 1
(Terminating to Attendant Console
by receiving Forward GII).
DATA
NONE No data
00 Not used
01 Called line idle (charge)
02 Called line busy
03 Not used
04 Congestion
05 Called line idle (no charge)
06 Called line idle (calling subscriber control)
07 Unallocated number
08
Not used
15
NONE No data
00 Send GI first digit, change over GA
01 Send GI next digit, change over GA
02 Not used
03 Send GII, change over GB
04 Congestion
05 Send GIII, next digit
06
Not used
08
09 Send GI same digit, change over GA
10
Not used
15
00 Terminating to Attendant Console
01
Not used
14
15 Terminating to station
– 335 –
: Initial Data
2ND DATA
MEANING
Continued on next page
NWA-008844-001 Rev.5.0
CM31
91ch3003.fm