NEC Univerge NEAX 2000 IPS Command Manual page 264

COMMAND CODE TITLE:
14
1ST DATA
DATA MEANING
XX ZZZ XX : FP/Virtual AP No.
(00-63)
ZZZ: AP/Virtual PIM
Port No. (000-127)
STATION NUMBER, TRUNK NUMBER, CARD NUMBER FOR EACH FP
DATA
D000
D255
DA00
DA09
DB00
DB09
DD000
DD255
E000
E007
2ND DATA
MEANING
Trunk number (C.O./Tie Line, Paging, Radio
Paging, BGM, Virtual trunk, 4VCT, SIP trunk)
• For COT Maximum 64 lines per PIM
• For DIT Maximum 48 lines per PIM
• For LDT/ODT Maximum 24 lines per PIM
• For TNT (BGM) Maximum 10 lines per sys-
tem
NOTE 1:
Trunk numbers already assigned by
CM07 should not be used.
NOTE 2: Do not assign Trunk number D255
for CCIS/IP/SIP.
Card number of External Hold Tone Interface
(0-9) for Music on Hold
(TNT/COT)
[Series 3200 R6.2 (R6.2)]
Card number of External Announcement
Machine Interface (0-9) for Wake Up service
[Series 3200 R6.2 (R6.2)]
IP-PAD (PN-32IPLA/PN-32IPLA-A) number
DD XXX
XXX: Channel No. of IP-PAD (000-255)
[Series 3200 R6.2 (R6.2)]
ATTCON/DESKCON number (0-7)
NOTE: ATTCON/DESKCON number should
be different from Large type ATTCON
numbers assigned by CM06.
[Series 3200 R6.2 (R6.2)]
– 240 –
CM14
RELATED
COMMAND
CM07
CM30
CM35
CM44
CM48
CM12 Y=04
CM44
CM48
CM0A Y=50
CM90
CM60
Continued on next page
NWA-008844-001 Rev.5.0
91ch3002.fm
DECEMBER/02/2005