NEC Univerge NEAX 2000 IPS Command Manual page 642

COMMAND CODE TITLE:
A7
Y
No. MEANING
50 DS code point (DiffServ code) set-
ting for IP trunk control packet
NOTE 1:
Set this data when the router provides DiffServ QoS, if required.
DiffServ: Differentiated Services; one type of QoS.
QoS
NOTE 2: When this data is set, the TOS field Precedence set by CMA7 Y=44 is ineffective.
If you want to validate the Precedence set by CMA7 Y=44, set "CCC" (data clear) for CMA7
Y=50.
NOTE 3: This data setting is required only for Point-to-Multipoint connection.
52 Maximum threshold of packet dis-
card probability for IP trunk
53 Maximum value of jitter buffer for
IP trunk
NOTE:
Assign the value which exceeds the minimum value for jitter buffer set by CMA7 Y=54.
54 Minimum value of jitter buffer for
IP trunk
NOTE 1:
This data is used for the default delay for voice packet.
NOTE 2: Assign the value which does not exceed the maximum value for jitter buffer set by CMA7 Y=53.
CCIS CHANNEL DATA/IP TRUNK DATA/SIP TRUNK DATA
DATA
00-3F
NONE
: Quality of Service
001
100
IPT INITIAL
NONE
001
060
IPT INITIAL
NONE
001
060
IPT INITIAL
NONE
SETTING DATA
MEANING
DS code point
No data
1 %
(1 % increments)
100 %
10 %
1 ms.
(10 ms. increments)
600 ms.
300 ms.
10 ms.
(10 ms. increments)
600 ms.
40 ms.
– 618 –
CMA7
: Initial Data
RELATED
COMMAND
CM35 Y=161
CMA7 Y=44
Continued on next page
NWA-008844-001 Rev.5.0
91ch3007.fm
JULY/01/2006