NEC Univerge NEAX 2000 IPS Command Manual page 103

COMMAND CODE TITLE:
05
AP/FP/
Y VIRTUAL AP
NUMBER
8
FP/AP No.
00
01
02
03
04-31
04-31
NOTE 1: When the Remote site number 01-30 is set, the system recognizes that the as FP/AP is accommodated
at Remote site.
NOTE 2: The PIM number is a serial number within each site.
NOTE 3: When CM05 Y=4 is set, FP/AP is set as the FP/AP accommodated in the PIM at Main site.
NOTE 4: When setting the station number assigned by CM10/14 to the Physical PIM/Virtual PIM, the setting
data of CM05 Y=8 cannot be changed.
When changing the data of CM05 Y=8, clear the station number that is assigned to the Physical PIM/
Virtual PIM.
NOTE 5:
You should set one PIM to the FP number of Virtual FP. If two PIMs are set to the FP number of Virtual
FP, the Virtual FP cannot operate normally.
04-15, 20-31
9 00-63
See
PRECAUTION
(2)
AP/FP CARD TYPE, HIGHWAY CHANNEL
SETTING DATA
DATA
ACCOMMODATED SITE
FP/AP KIND
FP
FP
FP
FP
FP
AP
XX ZZ Setup of Virtual PIM which accommodates
Virtual AP
XX: 00: Site Number (When the system is
main site of Remote PIM over IP)
ZZ: 12/13: Virtual PIM number
[Series 3200 R6.2 (R6.2)]
Number of Virtual Station Ports used by visi-
tor station in visitor site
000 Number of Virtual Station Ports for Visitor
064
NONE No data
[Series 3500]
MEANING
(SITE No.)
Main Site (00)
Main Site (00)
Main Site (00)
Main Site (00)
Not used
Main Site (00)
– 79 –
INITIAL
RELATED
REMARKS
COMMAND
PIM
(PIM No.)
PIM0/PIM1 (0001)
PIM2/PIM3 (0203)
PIM4/PIM5 (0405)
PIM6/PIM7 (0607)
Not used
No data (99)
CM50 Y=0 NOTE 11
CM14 NOTE 16
Continued on next page
NWA-008844-001 Rev.5.0
91ch3001.fm
DECEMBER/02/2005
CM05