NEC Univerge NEAX 2000 IPS Command Manual page 150

Internet protocol server
Hide thumbs Also See for Univerge NEAX 2000 IPS:
Table of Contents

Advertisement

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE
580
Duration of displaying the name when the incoming call is
answered/the select key for Calling Number Display and Call-
ing Name Display or CID key is pressed
[Series 3700 R12.2]
582
Date display when searching a message set by Message
Reminder from D
[Series 3800]
583
Whether the calling number is automatically stored or not when
the station call via CCIS is abandoned
[Series 3800]
584
Caller ID sent to ISDN terminal when terminating a call from
Single Line Telephone/D
[Series 3800]
585
Whether the service which is set to a group member station is
effective when the group members are called by Group Feature
Key
[Series 3800]
NOTE:
When the second data of CM08>585 is set to 0, the following services are effective.
Call Forwarding-All Calls/Split Call Forwarding-All Calls/Call Forwarding-All Calls of Mobility
Access/Do Not Disturb/Transfer the call to station set Do Not Disturb (CM51 Y=10)/Call Forwarding-
Logout
588
CID Call Back when an incoming call is forwarded, when a
station to which a call is terminated is busy, or when a station to
which a call is terminated is set Do Not Disturb
[Series 3900]
NOTE:
CID Call back by this command is available under the following conditions.
• The D
ing-Don't Answer (No answer)/Call Forwarding-D
• The D
• The D
589
Operation for calling number automatically storing per station
when the number of calling number is over the maximum
[Series 3900]
NOTE:
This command is effective only for automatically storing calling number of trunk calls.
BASIC SERVICE FEATURES
term
term
to ISDN terminal
term
station line is set to Call Forwarding-All Calls/Call Forwarding-Busy Line/Call Forward-
term
station line is set to Do Not Disturb when a trunk call is terminated.
term
station line received the incoming call is busy when a trunk call is terminated.
0
6 seconds
1
Until call is finished/key is pressed
again
0
To display
1
Not displayed
0
To store
1
Not stored
0
Calling number assigned by CM12
Y=12, 13/CM50 Y=05
1
Originating station number
0
Effective
1
Ineffective
0
To provide
1
Not provided
term
IP logout when a trunk call is terminated.
0
To delete the oldest calling number
and store the new calling number
1
Not stored the new calling number
– 126 –
: Initial Data
SETTING DATA
Continued on next page
NWA-008844-001 Rev.5.0
91ch3001.fm
JUNE/01/2007
CM08

Advertisement

Table of Contents
loading

Table of Contents