NEC Univerge NEAX 2000 IPS Command Manual page 400

COMMAND CODE TITLE:
35
Y
No. MEANING
272 Progress Description by
Overlap Receiving-Q-SIG
[Russia Only]
[Series 3600]
NOTE 1: This command is effective when the second data of CM35 Y=244 is set to "0".
NOTE 2:
This command should be assigned to incoming trunk route.
273 Sending the called party
number to outgoing trunk
route before receiving all
digits of the called party
number in tandem connec-
tion (Q-SIG to Q-SIG)
[Russia Only]
[Series 3600]
NOTE: This command should be assigned to incoming trunk route of tandem office.
276 ISDN Alternative Routing
for Remote PIM in survival
mode when receiving trunk
call
[Series 3700 R12.2]
277 Call Completion to Busy
Subscriber (CCBS) for a call
originating office
[For EU]
[Series 3700 R12.2]
278 Call Completion to Busy
Subscriber (CCBS) for a call
termination office
[For EU]
[Series 3700 R12.2]
TRUNK ROUTE DATA
DATA
1 Progress Description 1
4 Progress Description 4
8 Progress Description 8
15 No data
0 To send
1 Not sent
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
SETTING DATA
MEANING
– 376 –
CM35
: Initial Data
RELATED
COMMAND
CM35 Y=244
Continued on next page
NWA-008844-001 Rev.5.0
91ch3003.fm
NOVEMBER/15/2006