NEC Univerge NEAX 2000 IPS Command Manual page 140

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE: 400-493
BASIC SERVICE FEATURE
400 Send Calling Party Subaddress to ISDN network
401 Terminating system for Called Party Subaddress
402 Advice of Charge (AOC) display on D
been summed over $9999.99/€655.35 (After 6 seconds, the dis-
play goes off.)
[Australia/France/Germany/Netherlands/Italy/Greece/
Luxembourg/Portugal/Spain/Sweden]
403 Timing start when making ISDN call from attendant
404 Advice of Charge
[Australia/France/Germany/Netherlands/Italy/Greece/
Luxembourg/Portugal/Spain/Sweden]
405 Consecutive Speed Dialing when making ISDN call
407 Busy tone is sent to calling party of ISDN when called party is
busy in tandem connection (ISDN to COT)
420 Frequency of metering pulse for COT
[Australia Only]
421 Transmission level for DIT
[Brazil (900 Ω)/New Zealand]
term
422 D speaker volume control (6dB gain) in on-hook speaker
mode
[Australia Only]
424 Method of charging a transferred call
BASIC SERVICE FEATURES
term
when the charge has
0 To send
1 Not sent
0 Station call
1 Terminating system assigned by
CM30 Y=02/03/40/41
0 Flashing display
1 Fixed display
0 Not available
1 Available
0 Not available
1 Available
0 Available
1 Not available
0 Available (BT)
1 Not available (RBT)
0 16 kHz
1 50 Hz/12 kHz
INITIAL
0 For Brazil/New Zealand
1 For other than Brazil/New Zealand
0 Available
1 Not available
0 Charging to transferring station or
transfer destination station
1 Split charging to both transferring sta-
tion and transfer destination station
– 116 –
: Initial Data
SETTING DATA
Continued on next page
NWA-008844-001 Rev.5.0
91ch3001.fm
JULY/01/2006
CM08