NEC Univerge NEAX 2000 IPS Command Manual page 957

• Station Number, Trunk Number, Card Number (CM10/CM14)
The following data is assigned according to the sequential slot location number of the associated cir-
cuit cards.
CARD
PN-4/8LC Single Line
Telephone
PN-2/4/8DLC D
PN-2/4/8DLC ATTCON/
DESKCON
PN-2/4/8COT Trunk
PN-2/4LDT
PN-2ODT
PN-8RST DTMF Receiver
NOTE: If the DSS Console is not connected to the system, though PN-4DLC card is mounted in the slot,
the data (F200-F455) for D
Station Number, Trunk Number, Card Number
PURPOSE ASSIGNED DATA
200-455
term
F200-F455
E004-E007
D000-D255
E201-E203 (PIM0/1)
E204-E207 (PIM2/3)
term
is assigned.
CHAPTER 4 RESIDENT SYSTEM PROGRAM
Station Numbers 200 through 455
for Single Line Telephone and
term
D
sequential slot location number of
associated circuit card.
ATTCON Numbers E004 through
E007 are assigned according to
sequential slot location number of
associated circuit card.
Consecutive card number beginning
at 00 is assigned according to the
sequential slot location number of
the associated circuit cards.
– 933 –
PROGRAMMED DATA TABLES
REMARKS
are assigned according to
NWA-008844-001 Rev.5.0
91ch4001.fm