NEC Univerge NEAX 2000 IPS Command Manual page 377

COMMAND CODE TITLE:
35
Y
No. MEANING
24 DTMF Inter-digital pause
25 DP Make Ratio
26 DTMF signal width
28 Outgoing Trunk Queuing
32 Distinctive LED indication
term
on D during external
incoming call termination
NOTE: The LED indication for an internal incoming call is red (120 IPM flashing). For indicating the termi-
nation of transferred external incoming call, the flashing LED color depends on CM08>137.
33 Interval of ringing signal to
station on incoming calls
[Other than North Amer-
ica]
NOTE: For SLT, Internal Ringing is applied. For D
[For Australia/Asia/Africa/Europe/Latin America/Middle East/Russia]
-0.25 seconds OFF-0.25 seconds ON-0.25 seconds OFF
TRUNK ROUTE DATA
DATA
0 32 ms.
1 64 ms.
2 80 ms.
3 96 ms.
4 160 ms.
5 192 ms.
6 240 ms.
7 128 ms.
0 39 % Make Ratio
1 33 % Make Ratio
0 64 ms.
1 128 ms.
0 Not allowed
1 Allow
0 Green (120 IPM)
1 Red (120 IPM)
0 Ringing
1 Special Ringing
2 Internal Ringing
3 External Ringing
SETTING DATA
MEANING
NOTE
See CM08>397
term
, Special Ringing; 0.5 seconds ON-0.5 seconds OFF
[For EU]
– 353 –
: Initial Data
RELATED
COMMAND
CM15 Y=02
CM08>137
CM08>397
or 0.25 seconds ON
is applied.
Continued on next page
NWA-008844-001 Rev.5.0
NOVEMBER/15/2006
CM35
91ch3003.fm