NEC Univerge NEAX 2000 IPS Command Manual page 73

COMMAND CODE TITLE:
00
1ST DATA
DATA
90 Execute the office data conversion
[Series 3200 R6.2 (R6.2)]
NOTE 1:
NOTE 2:
NOTE 3:
SYSTEM DATA MEMORY ALL CLEAR
MEANING
When upgrading the software of the system from Series 3300 or before to Series 3400 or later
this data is required.
When first data "90" is typed, second data "1" is displayed. Also while converting the office
data, "1" is displayed.
There is no problem even if the office data conversion is executed again and again.
DATA
0 Start converting
1 Always displayed after first data "90" is
typed
– 49 –
OFF LINE
2ND DATA
MEANING
NWA-008844-001 Rev.5.0
CM00
NOTE 2
91ch3001.fm
JULY/01/2006