NEC Univerge NEAX 2000 IPS Command Manual page 247

COMMAND CODE TITLE:
12
Y
No. MEANING
49 Station controlled by AP00
card in Billing/Hotel fea-
tures
[Series 3400]
AP00 INITIAL
NOTE 1:
In billing/hotel features using AP00 card, a maximum of 504 stations can be controlled by AP00 card.
When 505 or more stations are accommodated in a system, you have to specify to each station whether
a station is controlled by AP00 card or not.
NOTE 2: When billing/hotel features using AP00 card are provided in a system that has 505 or more stations, set
the 2nd data 0 or 1 to all stations.
NOTE 3: You can confirm stations assigned by CM12 Y=49. Execute CM12 Y=91 10 minutes after AP initializa-
tion. Check CM12 Y=49 data setting when NONE is displayed even though a station is set as a station
controlled by AP00 card.
NOTE 4: When you change CM12 Y=49 data setting, output the billing information to a printer before changing.
50 Location number of
term
D IP for Remote Con-
nection
[Series 3100]
61 Warning SST sending timer
for forced release
[Series 3500]
NOTE:
This command is effective when the forced release is provided to the destination trunk
route (CM35 Y=247 and 248 is set to 0).
62 Do Not Disturb/Message
Waiting Lamp Indication
on Line/Trunk/Feature keys
term
of D
[Series 3500]
STATION CLASS-1
DATA
0 Not controlled
1 Controlled
3 Only 504 stations are controlled in order of station
registration
(The 505 or more stations are not controlled)
00 Location number 00
63 Location number 63
NONE Location number 00
0 Depends on Timer A (CM41 Y=0>114)
1
Depends on Timer B (CM41 Y=0>115)
2 Depends on Timer C (CM41 Y=0>116)
3 Forced release is not provided
0 Neither Message Waiting Lamp nor Do Not Dis-
turb Lamp is indicated
1 Not used
2 Do Not Disturb Lamp Indication
3 Message Waiting Lamp Indication
(effective when CM08>140: 0)
SETTING DATA
MEANING
– 223 –
CM12
: Initial Data
RELATED
COMMAND
CM12 Y=91
CM67
CM35 Y=247
CM35 Y=248
CM08>140
CM15 Y=188
CM15 Y=189
Continued on next page
NWA-008844-001 Rev.5.0
91ch3002.fm
NOVEMBER/15/2006