NEC Univerge NEAX 2000 IPS Command Manual page 130

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE
254 Whether the Hold key of the D
Tenant Set key for an internal or external call
255 Name Display-station/trunk and Guest Name Display on D
and ATTCON/DESKCON
258 When the temporary service class returns to proper service class
(Forced Account Code and Authorization Code)
259 Warning tone sent to connected parties when monitoring
Station-to-Station or Station-to-Trunk call
NOTE: Monitoring telephone conversations may be illegal
under certain circumstances and laws. Consult a legal
advisor before implementing the monitoring of
telephone conversations. Some federal and state laws
require a party monitoring a telephone conversation to
use beeptones, to notify all parties to the telephone
conversation, and/or to obtain consent from all parties
to the telephone conversation. Some of these laws pro-
vide strict penalties for illegal monitoring of telephone
conversations.
term
262 D ringer volume control and sending of Ring Test Tone
• To ring the ringer: press
• To adjust the ringer volume: press
265 Display of Busy Out from ACD/UCD group on DSS Console
266 One hit ringing for Call Forwarding-All Calls
267 Hotel feature (Wake-up, Do Not Disturb, Message Waiting,
Room Cutoff) records printout on Hotel printer, and the report
is sent to PMS when setting or resetting the hotel feature from
Hotel Console or Administrative station
BASIC SERVICE FEATURES
term
is used as the Call Park-
Feature and dial 0
or
0
1
term
0
1
0
1
0
1
0
1
0
1
0
1
0
1
– 106 –
: Initial Data
SETTING DATA
Call Park-Tenant Set key
Hold key
Not provided
To provide
When called number has been dialed
When station goes on hook
Not sent
To send (only once)
Available
Not available
To provide
Not provided
Restricted
Allowed
Available
Not available
Continued on next page
NWA-008844-001 Rev.5.0
CM08
91ch3001.fm