NEC Univerge NEAX 2000 IPS Command Manual page 561

COMMAND CODE TITLE:
76
Y
No. MEANING
34 Specification of
the call terminat-
ing method for
DID incoming call
with no CLI in
Day Mode
[Series 3600]
35 Whether the call
terminating
method is speci-
fied for DID
incoming call with
no CLI in Night
Mode/Mode A/
Mode B
[Series 3600]
NOTE: Assign the call terminating method by CM76 Y=36 when this command is set to 0/1.
36 Specification of
the call terminat-
ing method for
DID incoming call
with no CLI in
Night Mode/
Mode A/Mode B
[Series 3600]
DIGIT CONVERSION ON DID CALL
1ST DATA
DATA
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
000-999:
Number Conver-
sion Block No.
assigned by
CM76 Y=00/90
2ND DATA
MEANING
0 To transfer to the DAT/another
station/Attendant Console (assigned
by CM51 Y=33)
1 To reject the call termination
term
2 To terminate D
indication/unusual ringer tone/
unusual ringer pattern (assigned by
CM76 Y=37, 38, 39)
3 To terminate as usual
0 Specified when reason of the incom-
ing call with no CLI is "Privacy"
1 Specified for all incoming call with
no CLI
3 Not specified
0 To transfer to the DAT/another sta-
tion/Attendant Console (assigned by
CM51 Y=33)
1 To reject the call termination
2 To terminate the D
LED indication/unusual ringer tone/
unusual ringer tone pattern (assigned
by CM76 Y=37, 38, 39)
3 To terminate as usual
– 537 –
: Initial Data
REMARKS
CM51 Y=33
CM76 Y=33,
37, 38, 39
with unusual LED
CM76 Y=36
CM51 Y=33
CM76 Y=35,
37, 38, 39
term
with unusual
Continued on next page
NWA-008844-001 Rev.5.0
DECEMBER/02/2005
CM76
91ch3005.fm