NEC Univerge NEAX 2000 IPS Command Manual page 292

COMMAND CODE TITLE:
16
DATA TABLE:
Y
No. MEANING
0 Station numbers to
be included in Call
Pickup Group
2 Station number
included in Group
Diversion
3 Display of station
numbers included in
Call Pickup group
CALL PICKUP GROUP/GROUP DIVERSION GROUP
STATION NUMBER (A)
DATA
X Station number (A)
XXXXXXXX
When assigning station numbers to a Call Pickup group, only two station numbers can be
assigned per operation. Thus, by repeating the operation as often as required, all the station
numbers to be included in a Call Pickup group can be assigned. The two station numbers to
be assigned by one operation are defined as Station number (A) and Station number (B).
For example, when defining a Call Pickup group with station numbers 300, 301, and 302,
three operations are performed.
Station number (A)
1st Operation
2nd Operation
3rd Operation
By these three operations, a chain of three lines is set up. As seen from above, one station
can be either Station Number (A) or Station Number (B). Thus, Station Number (A)/(B) is
used for identifying which of the two station numbers is to be set first.
X Station numbers to be
included in a Group Diver-
XXXXXXXX sion
By entering a station number as the first data, the station numbers included in the group are
displayed by pressing the
OPERATION
1st STN A + DE
2nd +
DE
3rd +
DE
MEANING
XXXXXXXX
NONE
Station number (B)
300
301
302
NONE
key.
DE
DISPLAY
STN A: STN B
STN B: STN C
STN C: END
– 268 –
SETTING DATA
DATA MEANING
X Station number (B)
No data
301
302
300
00 Group Diversion Group 00
30 Group Diversion Group 30
See
No data
Continued on next page
NWA-008844-001 Rev.5.0
CM16
: Initial Data
CM19 Y=6
91ch3002.fm