NEC Univerge NEAX 2000 IPS Command Manual page 380

COMMAND CODE TITLE:
35
Y
No. MEANING
46 DTMF sender release timing
47 C.O. LD, DID trunk Gain
PAD
[Not used in Australia/
North America]
48 Sending Backward signal
when address is completed
[Other than North
America]
Sending Busy/Idle informa-
tion to network
[North America Only]
49 SMDR for incoming call
51 Restriction of outgoing con-
nection
(Unrestricted) (RCA)
52 Restriction of outgoing con-
nection
(Non-Restricted-1) (RCB)
53 Restriction of outgoing con-
nection
(Non-Restricted-2) (RCC)
54 Restriction of outgoing con-
nection
(Semi-Restricted-1) (RCD)
TRUNK ROUTE DATA
DATA
0 2 seconds
1 4 seconds
2 6 seconds
3 8 seconds
4 12 seconds
5 14 seconds
6 16 seconds
7 10 seconds
0 Transmitter PAD: + 3dBr,
Receiver PAD: + 5dBr
1 Receiver PAD: + 5dBr
3 0dBr (No amplification)
0 Set up speech condition without waiting
Forward GII signal
1 Waiting Forward GII signal
0 Not available
1 Available
0 To provide
1 Not provided
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
SETTING DATA
MEANING
– 356 –
: Initial Data
RELATED
COMMAND
See PRE-
CAUTION
(4)
CM13 Y=05
CM12 Y=01
Continued on next page
NWA-008844-001 Rev.5.0
CM35
91ch3003.fm