NEC Univerge NEAX 2000 IPS Command Manual page 167

COMMAND CODE TITLE:
0A
Y
No. MEANING
21 Echo Canceller for IP-PAD
NOTE 1: This command is available when PN-32IPLA/PN-32IPLA-A is used. For this feature, Series 3200 R6.2
software or before is required.
NOTE 2: Assign the Echo Canceller control by CM67 Y=03 in the conditions as follows.
• Series 3200 R6.2 software or later is used.
• PN-8IPLA is used.
22 NLP control for IP-PAD
[Series 3200 R6.2
(R6.2)]
NOTE 1: This command is available when PN-32IPLA/PN-32IPLA-A is used. For this feature, Series 3200 R6.2
software or before is required. When Series 3200 R6.2 or later is used, the Non Linear Processor Con-
trol is always provided.
NOTE 2: Set the second data to "0" usually.
23 Sending PAD level for SIP/
IP-PAD
NOTE 1: Set the PAD level by CM67 Y=02, when using Series 3200 R6.2 (R6.2) software or later.
NOTE 2: Set the second data in range of 0 to 14 dB (14 dB Loss), when using the PN-8IPLA/PN-8IPTA card.
This data is available only when the second data is set to 6 fixed by CM35 Y=19 when using the PN-
8IPTA card.
24 Receiving PAD level for
SIP/IP-PAD
NOTE 1: Set the PAD level by CM67 Y=02, when using Series 3200 R6.2 (R6.2) software or later.
NOTE 2:
Set the second data in range of 0 to 14 dB (14 dB Loss), when using the PN-8IPLA/PN-8IPTA card.
This data is available only when the second data is set to 6 fixed by CM35 Y=19 when using the PN-
8IPTA card.
LAN INTERFACE ASSIGNMENT
1ST DATA
DATA MEANING
00 LAN Interface
number
31
00 LAN Interface
number
31
00 LAN Interface
number
31
00 LAN Interface
number
31
SIP INITIAL
DATA
0
1
0
1
00
16
NONE
00
16
NONE
– 143 –
IP-PAD INITIAL
IPT INITIAL
: Initial Data
2ND DATA
MEANING
Echo Canceller OFF
Echo Canceller ON
Available
Not available
0 dB PAD
–16 dB PAD
0 dB PAD
0 dB PAD
–16 dB PAD
0 dB PAD
Continued on next page
NWA-008844-001 Rev.5.0
JULY/01/2006
CM0A
91ch3001.fm