NEC Univerge NEAX 2000 IPS Command Manual page 814

COMMAND CODE TITLE:
D000
DATA
123 Clear of the call records which have been printed out
NOTE: Effective when CMD000>16: 1 or CMD001>128: 1.
126 Control of External alarm relay (DK) when the accumulation
rate of billing memory exceeds the value set by CMD001>229
128 Display of the totaled bill of call records on group basis
NOTE:
Effective when CMD001>122: 1.
134 Send Wake Up message to PMS when setting Wake Up
135 Send result of Wake Up message when performing Wake Up call
136 Send text (Message Waiting control text sending is available) to
VMS when resetting AP00
137 Number of digits for station number in the message format to
communicate with VMS
140 Send Violation Code message when PBX receives an illegal mes-
sage from PMS
141 Send Violation Code message when PBX receives an undefined
FTC message from PMS
142 Send Violation Code message when PBX receives an undefined
FC message from PMS
143 Send ANI/Caller ID to SMDR
150 Maid Status Record Printout
SMDR/CIS/PMS FUNCTIONS (1)
1ST DATA
FUNCTION
0 : Not available
1 : Available
0 : Relay ON/OFF
See CMD001>229 1 : Relay ON
0 : Not available
1 : Available
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : To send
1 : Not sent
0 : 6 digits
1 : 8 digits
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Not sent
1 : To send
0 : Not sent
1 : To send
NOTE:
0 : Not available
1 : Available
– 790 –
: Initial Data
2ND DATA
(every 0.5 seconds)
When 0 is set, the ANI is not
sent to SMDR, but area code
for calling party, area code for
called party; authorization
code is sent to the SMDR.
Continued on next page
NWA-008844-001 Rev.5.0
CMD000
91ch3009.fm