NEC Univerge NEAX 2000 IPS Command Manual page 185

COMMAND CODE TITLE:
0B
Y
No. MEANING
03 Simple Network Manage-
ment Protocol (SNMP) data
setting
NOTE: Restrict the use of community name "admin" (set the community name to "public") except the system
construction.
Simple Network Manage-
ment Protocol (SNMP) data
setting
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
00 SNMP port
[Series 3100]
01 Community
Name "admin"
[Series 3100]
02 Trap is sent to the
SNMP manager
[Series 3200
R6.2 (R6.2)]
03
Definition of the IP
address for the
SNMP manager
[Series 3300]
04 Kind of Trap
message (Spe-
cific, Object ID)
sent to SNMP
manager
[Australia
Only]
[Series 3600]
10 Community
name (1/2)
(1-16 characters)
[Series 3200
R6.2 (R6.2)]
DATA
0
1
0
1
0
1
0
1
0
1
XX...X
NONE
– 161 –
INITIAL
: Initial Data
2ND DATA
MEANING
Open SNMP port
Not open SNMP port
Allow (admin)
Restrict (public)
To send
Not sent
Subnet Mask of the IP address for
the SNMP manager (First place)
IP address for the SNMP manager
(Fourth place)
Variable Trap message by exter-
nal alarm kind (MJ/MN/--)
Fixed Trap message
Character Code by MAT/CAT
(Maximum 32 digits: 16 charac-
ters)
No data
See Character Code Table in
CM77.
Continued on next page
NWA-008844-001 Rev.5.0
JULY/01/2006
CM0B
91ch3001.fm