[Cmaf] Visitor Ps Data Assignment - NEC Univerge NEAX 2000 IPS Command Manual

COMMAND CODE TITLE:
AF
FUNCTION:
This command is used to assign the Visitor PS data for Roaming.
PRECAUTION:
(1) This data setting is valid when DBM (AP00-A/AP00-B) card is online.
(2) This command is effective only for North America/Latin America.
ASSIGNMENT PROCEDURE:
+ + DE
ST AFYYY
DATA TABLE:
Y
No. MEANING
000 Home PBX ID for Visi-
tor PS
[For PCS]
001 Route Selection Pattern
assignment for Visitor
PS
[For PCS]
002 Trunk Restriction Class
in Day, Night Mode for
Visitor PS
[For PCS]
VISITOR PS DATA ASSIGNMENT
1ST DATA
+ +
DE
(1-4 digits)
DATA
X-XXXX
000-511
000-511
2ND DATA
+ +
EXE
(1-4 digits)
1ST DATA
MEANING
Home PBX ID
(1-4 digits, Decimal)
Data Table No. assigned
by CMAF Y=000
Data Table No. assigned
by CMAF Y=000
– 651 –
: Initial Data
2ND DATA
DATA NEANING
000-511 Data Table No. 000-511
CCC Data clear
NONE No data
00-07 Route Selection Pattern
No. 00-07
CCC Data clear
NONE No data
01 Unrestricted (RCA)
02 Nonrestricted 1 (RCB)
03 Nonrestricted 2 (RCC)
04 Semirestricted 1 (RCD)
05 Semirestricted 2 (RCE)
06 Restricted 1 (RCF)
07 Restricted 2 (RCG)
08 Fully Restricted (RCH)
CCC Data clear
No data
NONE
Continued on next page
NWA-008844-001 Rev.5.0
CMAF
91ch3007.fm