NEC Univerge NEAX 2000 IPS Command Manual page 807

COMMAND CODE TITLE:
FA
Y
No. MEANING
20 • By sending ICMP TYPE=8 (ping request) to the destination terminal, you ask whether the terminal is correctly
connected/set or not.
• Receiving ICMP TYPE=0 (ping reply) from the destination terminal means that the terminal is correctly con-
nected/set.
• Receiving ICMP TYPE=3/11/12 (reply [error]) from the destination terminal means that the terminal is not
correctly connected/set.
NOTE 1: If ICMP TYPE not listed above is received, "HARDWARE ERROR" is displayed.
NOTE 2: TOS (Type of Service) is present in IP header, and represents QoS (Quality of Service).
Precedence/delay/throughput/reliability that determine quality are contained within TOS.
term
30 Read the D IP
Station number reg-
istered in Fixed
Connection Mode
[Series 3700
R12.2]
NOTE 1:
The station number for Fixed Connection Mode registered by CM12 Y=92 is read by this command.
NOTE 2: When the 2nd data is set to "CCC", the MAC Address of the appropriate D
Y=92 is cleared.
term
50 Read the D IP
firmware's status of
automatic update
[Series 3200 R6.1
(R6.1)]
NOTE: If you want to interrupt updating or to reset count data, do the following operation.
ST + FA50
When this operation is performed, the count data which can be read by CMFA Y=50>01/02
is cleared.
term
D IP APPARATUS INFORMATION
1ST DATA
DATA MEANING
000 Block No.
255
00 Status of auto-
matic update
01 Number of termi-
nal that succeeded
in updating
02 Number of termi-
nal that failed in
updating
+ DE + 00 + DE +
DATA
X
XXXXXXXX
CCC
NONE
00
01
NOTE
10
XXX
XXX
CCC + EXE
– 783 –
INDICATION
MEANING
term
D IP Station No.
Clear
No data
term
IP registered by CM12
Not started
Now updating
Completed
Number of succeeded terminal
Number of failed terminal
NWA-008844-001 Rev.5.0
CMFA
91ch3008.fm
JULY/01/2006