NEC Univerge NEAX 2000 IPS Command Manual page 399

COMMAND CODE TITLE:
35
Y
No. MEANING
267 Coding Type when sending
the ISDN Connected Line
Identification Presentation
(COLP)
[For Spain]
[Series 3600]
268 Calling Party Name sending
to ISDN
[North America Only]
[Series 3600]
270 Dial Tone (DT) sending to
calling party of opposite
office when receiving the
SETUP ACK message by
Overlap Sending-Q-SIG
[Russia Only]
[Series 3600]
NOTE:
This command should be assigned to outgoing trunk route.
271 Progress Description by
Overlap Sending-Q-SIG
[Russia Only]
[Series 3600]
NOTE 1: This command is effective when the second data of CM35 Y=270 is set to "1".
NOTE 2:
This command should be assigned to outgoing trunk route.
TRUNK ROUTE DATA
DATA
0 Codeset 5 (Spanish specification)
1 Codeset 0 (ETSI specification)
0
To provide
1 Not provided
0 To send DT of own office
1 To send DT of own office when the received
Progress Description is not same as the Progress
Description assigned by CM35 Y=271
(Not sent when Progress Description is same as
the Progress Description)
2 To send DT from opposite office
(Not sent when DT is not sent from opposite
office)
3 Not sent
1 Progress Description 1
4 Progress Description 4
8 Progress Description 8
15 No data
SETTING DATA
MEANING
– 375 –
CM35
: Initial Data
RELATED
COMMAND
CM35 Y=270
Continued on next page
NWA-008844-001 Rev.5.0
91ch3003.fm
JANUARY/20/2006