NEC Univerge NEAX 2000 IPS Command Manual page 770

COMMAND CODE TITLE:
EA
: Initial Kind (Upper digit)
a
1: Program address information
2: Receive command information
F: No system initialization information
: Initial Kind (Lower digit)
b
0 : Power On Initialize
1 : Initialize by Reset Button (SW1)
2 : Serious failure 1
3 : Serious failure 2
4 : Not Used
5 : Serious failure 3
6 : Serious failure 4
7 : Serious failure 5
8 : Serious failure 6
9 : SW3 was changed to 0
A : Serious failure 7
B : Initialize by CAT or MAT
C : Not used
D : Not used
E : Not used
F : Not used
: System Initialization information
c
The address of the program which caused system initialization. This information is output in
the case of system initialization only when the initial kind in
: Communication Failure Kind
d
00 : Overflow of data sending buffer to FP/AP
01 : Invalid data received from FP/AP
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
– 746 –
is 02, 03, 06, or 0A.
b
Continued on next page
NWA-008844-001 Rev.5.0
CMEA
91ch3008.fm