NEC Univerge NEAX 2000 IPS Command Manual page 531

COMMAND CODE TITLE:
67
Y
No. MEANING
03 Echo Canceller
between location
groups
[Series 3200
R6.2 (R6.2)]
NOTE 1:
This data setting is valid to the group that is set to "XX" in the first data.
NOTE 2: When Echo Canceller control for IP-PAD is operated in the system Series 3200 R6.2 or later is used,
this command must be used. The data setting of CM0A Y=21 (Echo Canceller control for IP-PAD) is
invalid.
NOTE 3: When Series 3200 R6.2 or later is used, the Non Linear Processor Control is always provided. The
data setting of CM0A Y=22 (NLP control for IP-PAD) is invalid.
04 Minimum value of
jitter buffer
between location
groups
[Series 3200
R6.2 (R6.2)]
NOTE 1:
Assign the value which does not exceed the maximum value of jitter buffer set by CM67 Y=05.
NOTE 2: This data setting is valid to the group that is set to "XX" in the first data.
05 Maximum value of
jitter buffer
between location
groups
[Series 3200
R6.2 (R6.2)]
NOTE 1: Assign the value which exceeds the minimum value of jitter buffer set by CM67 Y=04.
NOTE 2:
This data setting is valid to the group that is set to "XX" in the first data.
LOCATION DATA ASSIGNMENT
1ST DATA
DATA MEANING
XX ZZ XX: Location
number of
group (00-63)
ZZ : Location
number of
group (00-63)
XX ZZ XX: Location
number of
group (00-63)
ZZ : Location
number of
group (00-63)
XX ZZ XX: Location
number of
group (00-63)
ZZ : Location
number of
group (00-63)
2ND DATA
DATA MEANING
00 Echo Canceller OFF
01 Echo Canceller ON
NONE Echo Canceller ON
CCC Clear
01 10 ms.
30 300 ms.
(10 ms. increments)
NONE 10 ms.
CCC Clear
01 10 ms.
30 300 ms.
(10 ms. increments)
NONE 300 ms.
CCC Clear
– 507 –
CM67
: Initial Data
RELATED
COMMAND
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CM0A Y=09
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CM0A Y=09
CMAD Y=29
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CM0A Y=09
CMAD Y=29
Continued on next page
NWA-008844-001 Rev.5.0
91ch3005.fm
JULY/01/2006