NEC Univerge NEAX 2000 IPS Command Manual page 279

COMMAND CODE TITLE:
15
Service Restriction Class A
No.
128 WCS Number Sharing set/cancel from sub station
NOTE: Set "0" to sub station.
Set "1" to main station.
129 WCS Number Sharing
Sub station is controlled as same as main station, by Message
Waiting lamp control signal sent to main station
130 System Clock Setup by Station Dialing
131 Set Relocation
Setting Side
132 Being moved and changed by Set Relocation
Set Side
133 Automatic Call Forwarding set by DISA
134 Manual Call Forwarding set by DISA
135 Keep volume level changed by volume button on D
the call is finished.
NOTE:
Set Relocation is not available for the following combination.
• Single Line Telephone and D
• PS and PS/Single Line Telephone/D
• Single Line Telephone (DP) and Single Line Telephone (PB)
term
• D (4-wire type) and D
• Combination of D
Also, Set Relocation should not be set to D
peripherals or function.
• DSS Console
• Add-on Module
• Analog Port Adapter
SERVICE RESTRICTION CLASS A
Y
MEANING
term
term
(2-wire type)
term
s with different number of Line/Trunk keys
SERVICE
REST.
CLASS (A)
00
15
NOTE
NOTE
term
, after
term
term
s which accommodate the following
– 255 –
: Initial Data
SETTING DATA
DATA MEANING
0 Allow
1 Restricted
0 Main station and sub
station are controlled
1 Only main station is
controlled
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
0 Allow
1 Restricted
Continued on next page
NWA-008844-001 Rev.5.0
91ch3002.fm
JULY/01/2006
CM15