NEC Univerge NEAX 2000 IPS Command Manual page 554

COMMAND CODE TITLE:
74
Y
DATA
2 X YY Z
4 X YY Z
5 X-XXXXXXXX
NOTE 1: 4-digit (Fixed) abbreviated code is used for Series 3300 to 3500 software.
1-8-digit abbreviated code is used for Series 3600 software or later.
NOTE 2: Memory area of Speed Calling-System (System Speed Dialing) with 1-8-digit abbreviated code is also
used as the memory area of Speed Calling-Station (Station Speed Dialing). Do not assign the same
Memory Slot number of Speed Calling-System (System Speed Dialing) with 1-8-digit abbreviated code
(set by CM74 Y=0) and as Memory Slot number of Speed Calling-Station (Station Speed Dialing) (set
by CM73).
NOTE 3: Set the same number of digits as the digits of abbreviated code assigned by CM42 Y=77 to the first
data.
NOTE 4: When setting the number of digits for abbreviated code to 5-8, the minimum number of the abbreviated
code that can be registered to the memory area is as follows.
• 5-digit abbreviated code: 500
• 6-digit abbreviated code: 333
• 7-digit abbreviated code: 250
• 8-digit abbreviated code: 200
STORED NUMBER FOR SPEED CALLING-STATION
(STATION SPEED DIALING)
1ST DATA
MEANING
X : 1000-Slot Memory Block
number (0-9)
YY: 10-Slot Memory Block
number (00-99)
Z : Memory Parcel number
(0-9)
X : 1000-Slot Memory Block
number (0, 3)
YY: 10-Slot Memory Block
number (00-99)
Z : Memory Parcel number
(0-9)
[Series 3600]
X: Abbreviated Code (0-9)
[Series 3300]
DATA
XXX...X
XXX...X
NONE
XXX...X
NONE
X YY Z
CCC
NONE
– 530 –
: Initial Data
2ND DATA
MEANING
Station Name Character by MAT/
CAT (Maximum 16 characters)
Calling Party Name Character
(Maximum 16 characters)
No data
Calling Party Name Character
Code (Maximum 32 digits: 16
characters) (for Russian)
See Character Code Table in
CM77.
No data
X : 1000-Slot Memory Block
Number (0-9)
YY: 10-Slot Memory Block Num-
ber (00-99)
X : Memory Parcel Number (0-9)
Clear
No data
NWA-008844-001 Rev.5.0
CM74
91ch3005.fm
JULY/01/2006