NEC Univerge NEAX 2000 IPS Command Manual page 271

COMMAND CODE TITLE:
14
1ST DATA
DATA MEANING
XX ZZZ XX : FP/Virtual AP No.
(00-63)
ZZZ: AP/Virtual PIM
Port No. (000-127)
STATION NUMBER, TRUNK NUMBER, CARD NUMBER FOR EACH FP
DATA
EEA XXX
2ND DATA
MEANING
IP-CS Registration
XXX represents CS number (000-255)
NOTE 1: For the port number of virtual CSH
set by 1st data, you can set only the
port number that is the multiple of 4
(000, 004, 008, ...056, 060).
NOTE 2: The amount of the number of ports
of virtual CSH and other numbers
of ports used by the system (PIM
port/Virtual PIM port) must not ex-
ceed 512 ports.
NOTE 3: Do not duplicate the CS number of
the IP-CS, and the CS number set
by CM10>EE3XXX.
[For PHS]
[Series 3300]
– 247 –
CM14
RELATED
COMMAND
CMAD
YY=00
Continued on next page
NWA-008844-001 Rev.5.0
91ch3002.fm