NEC Univerge NEAX 2000 IPS Command Manual page 771

COMMAND CODE TITLE:
EA
: FP/AP Number
e
[Series 3200 R6.1 or before]
C0-C3 : FP No. 00-03
D0-D3 : FP No. 16-19
C4-CF : AP No. 04-15
D4-DF: AP No. 20-31
: Power Failure Kind
f
00 : AC input failure
01 : Fuse break
02 : PWR alarm
: Fault Kind
g
00 : Fault notice from CS/ZT
01 : CS/ZT initial failure
02 : CS/ZT condition read failure
03 : CS/ZT condition unmatch
04 : B channel condition unmatch
05 : SYS-ID upload failure
06 : SYS-ID download failure
07 : CS/ZT make busy failure
08 : CS/ZT data load failure
09 : B channel make busy failure
0A: CS/ZT operation parameter change failure
0B : LCCH sending position failure
0C : Carrier selection failure
0D: CS/ZT expansion data read failure
0E : CS/ZT expansion data setting failure
0F : CS/ZT operation parameter 2 change failure
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
[North America/Latin America Only]
[Series 3200 R6.2]
C0-CF: FP No. 00-15
D0-DF: FP No. 16-31
C4-CF: AP No. 04-15
D4-DF: AP No. 20-31
– 747 –
[Series 3300 or later]
C0-CF : FP No. 00-15
D0-DF: FP No. 16-31
E0-EF : FP No. 32-47
F0-FF : FP No. 48-63
C4-CF : AP No. 04-15
D4-DF: AP No. 20-31
Continued on next page
NWA-008844-001 Rev.5.0
CMEA
91ch3008.fm