NEC Univerge NEAX 2000 IPS Command Manual page 124

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE
180 Ringing cadence on Automated Attendant call, DID call and
Remote Access to System call
[Other than North America]
Ringing cadence on Automated Attendant call, DID call and
DISA call
[North America Only]
term
181 D /DSS Console One-Touch key calling while another party
being rung, or while talking with another party
185 When the transferring station goes on-hook before the called
station answers for Call Transfer-All Calls service, if the trans-
ferred call remains unanswered for a preprogrammed duration,
the transferring station is recalled.
187 Recall priority over Call Forwarding
193 Sender prepause for C.O. outgoing call
(Not used with LCR)
194 Sender prepause for Tie Line outgoing call
199 Line Preselection on a D
Speaker key is required after pressing the desired Line/Trunk
key.
BASIC SERVICE FEATURES
Recall timing: See
term
0 Special Ringing
1 As per CM35 Y=33 or CM76 Y=22
0 0.4 seconds ON-0.2 seconds OFF
-0.4 seconds ON-2 seconds OFF
1 As per CM35 Y=33 or CM76 Y=22
0 Not available
1 Available
0 Not available
1 Available
CM41 Y=0>07
0 Recall is higher
1 Call Forward is higher
0 To provide
1 Not provided
0 To provide
1 Not provided
0 Not required
1 Required
– 100 –
: Initial Data
SETTING DATA
See CM08>397
Continued on next page
NWA-008844-001 Rev.5.0
91ch3001.fm
JUNE/01/2007
CM08