NEC Univerge NEAX 2000 IPS Command Manual page 282

COMMAND CODE TITLE:
15
Service Restriction Class A
No.
219 Call Forwarding-Busy Line for call forwarding in Mobility
Access Mode
[Series 3700 R12.2]
222 Room Status Code setting
(Room Cutoff/Do Not Disturb/Message Waiting/Wake Up
Call/Trunk Restriction class change)
[Series 3900]
400 Displaying pattern of Caller ID on the LCD of D
answering or after answering a trunk call
[Series 3800]
NOTE 1: When the second data of CM15 Y=400 is set to 0, set the second data of CM15 Y=136 to 1 (Calling
Name Display).
NOTE 2: When the second data of CM15 Y=400 is set to 1, set the second data of CM15 Y=136 to 0 (Calling
Number Display).
401 Entry of Authorization Code/Forced Account Code after dial-
ing an LCR access code and desired number
[Series 3900]
NOTE: To provide this operation, the following data assignments are required.
- Toll restriction
(CM12 Y=01, CM8A Y=5XXX: 000, CM81)
- LCR origination
(CM20: A126/A127/A128/A129, CM8A Y=5XXX: 180, CM85)
SERVICE RESTRICTION CLASS A
Y
MEANING
SERVICE
REST.
CLASS (A)
00
15
term
before
00
15
– 258 –
: Initial Data
SETTING DATA
DATA MEANING
0 Restricted
1 Allow
0 Allowed
1 Restricted
0 To display calling
number on upper line
of LCD, calling name
on middle line of LCD
1 To display calling
name on upper line of
LCD, calling number
on middle line of LCD
7 Not displayed calling
number and calling
name simultaneously
0 Allow (Authorization
Code)
1 Allow (Forced
Account Code)
2 Allow (Authorization
Code [PAD LOCK])
7 Restricted
NWA-008844-001 Rev.5.0
91ch3002.fm
JUNE/01/2007
CM15