NEC Univerge NEAX 2000 IPS Command Manual page 532

COMMAND CODE TITLE:
67
Y
No. MEANING
06 Diffserv Code
Point (DSCP) of
control packet and
voice packet
[Series 3200
R6.2 (R6.2)]
NOTE 1: This data is required when the system is connected to the router that provides the Diffserv type QoS
function.
NOTE 2: This data setting is valid to the packets that are sent to the group which is set "ZZ" in the first data
from the group which is set to "XX" in the first data.
NOTE 3: The TOS field precedence that is set by CM67 Y=01 is invalid when this data is set. To be valid the
TOS field precedence, set CM67 Y=01 again after this data setting.
07 Whether the
term
D IP at remote
site location from
IPS through NAT
can communicate
each other under
the same NAT or
not
[Series 3700
R12.1]
NOTE: The same location number must not be assigned to D
NAT. However, multiple location numbers can be assigned to D
same NAT.
08 Whether the con-
nection between
locations is
restricted or not
[Series 3700
R12.1]
NOTE: Restrict the following connection by this command when NAT is used.
- Connection via CCIS (Peer to Peer connection)
- Connection between Main Site and Remote Sites
- Connection between locations that is restricted the communications
LOCATION DATA ASSIGNMENT
1ST DATA
DATA MEANING
XX ZZ XX: Location
number of
group (00-63)
ZZ : Location
number of
group (00-63)
XX ZZ XX: Location
number of
group (00-63)
ZZ : Location
number of
group (00-63)
XX ZZ XX: Location
number of
group (00-63)
ZZ : Location
number of
group (00-63)
2ND DATA
DATA MEANING
XX ZZ XX: 00-FF: DSCP of
control packet
ZZ : 00-FF: DSCP of
voice packet
NONE C0A0
0 Under the same NAT
1 Under the different NAT
or Not used NAT
term
IP that is not accommodated under the same
term
0 To restrict
1 Not restrict
– 508 –
: Initial Data
RELATED
COMMAND
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CM0A Y=09
CM67 Y=01
CM67 Y=08
IP that is accommodated under the
CM67 Y=07
Continued on next page
NWA-008844-001 Rev.5.0
JANUARY/20/2006
CM67
91ch3005.fm