NEC Univerge NEAX 2000 IPS Command Manual page 223

COMMAND CODE TITLE:
10
SETTING DATA (STATION NUMBER, TRUNK NUMBER, CARD NUMBER)
LEN
DATA
000 EB002
763 EB127
(PIM
No. 0-7
+
Port No.
00-63)
EC00
EC31
ED00
ED03
EE3 XXX
EFX
EFXXXXXXXX
FX
FXXXXXXXX
STATION NUMBER, TRUNK NUMBER, CARD NUMBER
Card number of Digital Announcement Trunk (PN-2DATA/4DATA)
When accommodated in PIM 0/1 ..............EB002-EB031
When accommodated in PIM 2/3 ..............EB032-EB063
When accommodated in PIM 4/5 ..............EB064-EB095
When accommodated in PIM 6/7 ..............EB096-EB127
NOTE:
EB000 and EB001 are dedicated to built-in Digital Announce-
ment Trunk of MP card.
Add-on Module number
When accommodated in PIM 0/1 ................. EC00-EC07
When accommodated in PIM 2/3 ................. EC08-EC15
When accommodated in PIM 4/5 ................. EC16-EC23
When accommodated in PIM 6/7 ................. EC24-EC31
NOTE: The same number (the last two digits of the data) should not be
used, for both DSS Console (E100-E131) and Add-on Module
(EC00-EC31).
Card number of Conference Trunk (PN-CFT)
Card number of CS/ZT Interface
XXX represents CS/ZT number (000-255).
ISDN line station number
X-XXXXXXXX represents ISDN line station number.
X: 0-9, A (*), B (#)
term term
D /D IP station number
X-XXXXXXXX represents My Line number.
X: 0-9, A (*), B (#)
MEANING OF DATA
– 199 –
CM10
RELATED
COMMAND
CM30
CM49
CM90
CM98
INITIAL
CMAD
CM90
NWA-008844-001 Rev.5.0
91ch3002.fm
NOVEMBER/15/2006