NEC Univerge NEAX 2000 IPS Command Manual page 674

COMMAND CODE TITLE:
AE
Y MEANING
19 Handover
[For PHS]
CSH INITIAL
22 Destination SYS-ID
for priority synchro-
NOTE 6
nization
42 Network ID for
Roaming Service
[For PCS]
CSH INITIAL
NOTE 1: Assign the same number with the first 4 digits of the Individual PS number set by CM1D
Y=00.
NOTE 2: Be sure to set from the 1st digit to last digit (10 digits). Last 4 digits must be set as "0000".
NOTE 3: After changing this data, download the PS operation data by CM1D Y=20.
NOTE 4: PS operation data must be downloaded every time the control carrier number is changed.
NOTE 5: Be sure to set the 2nd data to 00 for BS31/BS41 handover.
NOTE 6:
This data is set when synchronizing with CS from which SYS-ID is different (CS of the other
company is included).
CS/ZT OPERATION DATA ASSIGNMENT
1ST DATA
DATA
00 Channel slot for
handover (for BS31/
BS41)
01 Delay correction
when the other type of
CS is used with BS31/
BS41
00-09 Wireless Block num-
ber set by CMAD
Y=30
00 Network ID assign-
ment
MEANING
NOTE 5
XXXXXXXXX
00000-65534
– 650 –
SETTING DATA
DATA MEANING
00 Channel Slot
No. 00
NONE No data
03 BS31 and BS21 are
used
NONE Only BS31/BS41 is
used
Destination SYS-ID
for clock synchroni-
zation
(Maximum 9digits,
Decimal)
NONE No data
Network ID
NONE No data
NWA-008844-001 Rev.5.0
CMAE
: Initial Data
91ch3007.fm
JUNE/01/2007