NEC Univerge NEAX 2000 IPS Command Manual page 790

COMMAND CODE TITLE:
EC
Office Data Copy [Series 3200 R6.2 (R6.2)]
Y
No. MEANING
8 Office data copy
from the Main site
to Remote sites
NOTE 5: You can assign only "0" to the second data. "1" is displayed as the second data while the
office data being copied.
Day Mode/Night Mode Apply
Y
No. MEANING
9 Applying Day
Mode/Night Mode
term
to all D s
NOTE 6: When the setting of CM08>577 is changed, or when the station tenant number of My Line is
changed by CM12 Y=04, set the second data to 0 (Start to apply) to apply Day Mode/Night
Mode to all D
MAINTENANCE BY MAT/CAT
1ST DATA
DATA MEANING
00 All Remote site
01 Remote site No. 01
30 Remote site No. 30
[Series 3700 R12.2]
1ST DATA
DATA MEANING
0 Day Mode/Night
Mode applying
term
s.
2ND DATA
DATA
0
1
3
2ND DATA
DATA
0
1
3
– 766 –
: Initial Data
RELATED
COMMAND
MEANING
Start to copy office CM43 Y=7
data
Now copying/
Office data copy
state can be read
Stand by/Office data
copy state can be
read
NOTE 5
: Initial Data
RELATED
COMMAND
MEANING
Start to apply CM08>577
Now applying CM12 Y=04
Stand by
NOTE 6
NWA-008844-001 Rev.5.0
CMEC
91ch3008.fm
JULY/01/2006