NEC Univerge NEAX 2000 IPS Command Manual page 759
Internet protocol server
Hide thumbs
Also See for Univerge NEAX 2000 IPS:
- Installation manual (619 pages) ,
- System manual (448 pages) ,
- Reference manual (421 pages)
Table of Contents
Advertisement
COMMAND CODE TITLE:
EA
NOTE 9:
The External Alarm Kind for "Number of lockout stations was less than predetermined
number" is fixed to No Alarm. In the case of this office data, even if the 2nd data is set to 0/
1/2/3, it simply means that the fault information is to be registered into Fault Memory. In
this case, External Alarm Kind cannot be changed.
NOTE 10:
Upon successful registration to SIP server for WLAN, the fault kind "3B" is registered as
fault information.
[Series 3600]
NOTE 11:
Set the output port for fault logs/call logs by CM40 Y=00.
NOTE 12:
When setting the second data to 1, fault kind 49 (IP component reset occurrence) is not reg-
istered.
NOTE 13:
When reading this data, second data 1 is displayed normally.
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
– 735 –
CMEA
NWA-008844-001 Rev.5.0
91ch3008.fm
JUNE/01/2007
Advertisement
Table of Contents
