NEC Univerge NEAX 2000 IPS Command Manual page 153

COMMAND CODE TITLE:
08
BASIC SERVICE FEATURE
649 Ringer Tone Pattern providing for CCIS/SIP incoming call
[Series 3600]
655 Operation when the ORT/T302 time out occurs
[Russia Only]
[Series 3600]
664 Operation of hooking/call holding after a station receives warn-
ing SST for forced disconnection
[Series 3500]
665 Shift from the communication between station and Trunk to
Three Way Calling (Conference [Three/Four Party]) with the
Timer for forced disconnection is in progress
[Series 3500]
666 Alternative Routing when no answer timer of outgoing call (T1
timer) time-out occurs in tandem connection (CCIS to CCIS)
[Series 3600]
669 Sending the station status type to the destination office when
term
the D /ATTCON calls a station set the DND over CCIS
[Series 3700 R12.1]
672 Releasing the path by RTP monitoring via SIP card
[Series 3700 R12.2]
NOTE:
When the second data of CM08>672 is set to 0, the path is released when the SIP card does not receive
RTP for 10 seconds after establishing the path.
675 Selecting the mailbox number to hear a message when the Play
key for Voice Mail Live Record-CCIS is pressed while seizing a
sub line
[Series 3700 R12.1]
676 Output message which is sent from PBX to ISDN network
when the 2nd line is released by Mobility Access hooking
[Series 3700 R12.2]
BASIC SERVICE FEATURES
0 To provide
1 Not provided
0 Stop connecting
1 Keep connecting
0 Allow
1 Restricted
0 Allow
1 Restricted
0 To provide (CGC sending)
1 Not provided (CFL sending)
0 To send DND setting
1 To send the restriction
0 To provide
1 Not provided
0 Mailbox number for My Line
1 Mailbox number for Sub Line
0 As per CM08>677
1 CALL PROC + DISC
– 129 –
: Initial Data
SETTING DATA
Continued on next page
NWA-008844-001 Rev.5.0
91ch3001.fm
NOVEMBER/15/2006
CM08