NEC Univerge NEAX 2000 IPS Command Manual page 170

COMMAND CODE TITLE:
0A
Y=50-93
Y
No. MEANING
50 IP-PAD card number of
LAN Interface for IP-PAD
51 VLAN function for SIP/IP-
PAD
[Series 3100]
52 Priority of VLAN ID for
SIP/IP-PAD
[Series 3100]
53 VLAN ID for SIP/IP-PAD
[Series 3100]
54 IP Address for VLAN for
SIP/IP-PAD
[Series 3100]
55 Subnet Mask for VLAN for
SIP/IP-PAD
[Series 3100]
NOTE 1: The higher number has higher priority.
NOTE 2:
One VLAN ID can be set to each LAN interface of the IP-PAD card.
NOTE 3: VLAN ID 0 is not available.
NOTE 4: To provide the Virtual LAN (VLAN) function with each LAN interface of the SIP card/IP-
PAD card, clear the IP Address and Subnet Mask that has been set by CM0A Y=01 and 02
after setting the data by CM0A Y=54 and 55.
LAN INTERFACE ASSIGNMENT
1ST DATA
DATA MEANING
00 LAN Interface
number
31
SIP INITIAL
DATA
0
7
0
1
0
1
2
3
4
5
6
7
0001
4094
NONE
000000000000
255255255255
NONE
000000000000
255255255255
NONE
– 146 –
IP-PAD INITIAL
IPT INITIAL
: Initial Data
2ND DATA
MEANING
Card Number of IP-PAD
NOTE: Set this data only when
the card number of the
IP-PAD is set by CM10.
To provide
Not provided
Priority 0 NOTE 1
Priority 1
Priority 2
Priority 3
Priority 4
Priority 5
Priority 6
Priority 7
VLAN ID NOTE 2
NOTE 3
No data
IP Address NOTE 4
No data
Subnet Mask NOTE 4
No data
Continued on next page
NWA-008844-001 Rev.5.0
NOVEMBER/15/2006
CM0A
91ch3001.fm