NEC Univerge NEAX 2000 IPS Command Manual page 254

COMMAND CODE TITLE:
13
No.
35 Send or not ringing signal to the sin-
gle line telephone connected to Ana-
log Port Adapter
36 Connection of TAPI Adapter
Send information of application to
term term
IP /D
NOTE: Set the second data to "0" for D
37 VMS Soft Key feature
NOTE:
Set this data to VMS station
number.
39 WCS Roaming for Virtual Station of
Visitor PS
[For PCS]
NOTE:
When using as WCS Roaming for Virtual Station of Visitor PS, this data must be assigned before
data assignment of CM1C for PS station number.
40 Station number assigned by CM11 for
BLF-CCIS
41 Register calling number into Redial
term
key on D
45 Group Call by Pilot Number Dialing
46 Call Forwarding-Don't Answer (No
Answer) Timing
[Series 3100]
NOTE: Call Forwarding-Don't Answer (No Answer) Timing is as follows when second data is set as 0.
When the timer for each station is set up by CME6 Y=07, 08: The timer of CME6 Y=07, 08 is ef-
fective.
When the timer for each station is not set up by CME6 Y=07, 08: The timer of CM41 Y=0>100,
101 is effective.
[Series 3200 R6.2 (R6.2)]
STATION CLASS-2
Y
MEANING
SP30
when answering the call
SETTING DATA
DATA
0 Not sent ringing signal
1 Send ringing signal
0 TAPI station
1 Ordinary station
0 To send
1 Not sent
term
SP30 in spite of the setting data of CM12 Y=48.
0 To provide
1 Not provided
0 Available
1 Not available
0 Other office station
1 Own office station
0 To provide
1 Not provided
0 To provide
1 Not provided
0 As per CM41 Y=0>100, 101/CME6 Y=07, 08
1 As per CM41 Y=0>01, 15
– 230 –
: Initial Data
MEANING
Continued on next page
NWA-008844-001 Rev.5.0
91ch3002.fm
CM13