NEC Univerge NEAX 2000 IPS Command Manual page 549

COMMAND CODE TITLE:
73
NOTE 3: An entry of "342106" would allocate six (6) 10-Slot Memory Blocks, which would accommo-
date sixty (60) Speed Calling-Station (Station Speed Dialing) numbers. 1000- Slot Memory
Block number 3 would be used, starting at 10-Slot Memory Block number 42, and ending at
10-Slot Memory Block number 47. Programming facility would not be allowed.
The memory area for a single called number is referred to as a "Memory Parcel". Ten Memory
Parcels are called a "10-Slot Memory Block", and one hundred 10-Slot Memory Blocks are called
a "1000-Slot Memory Block".
The relationship among Memory Parcels, 10-Slot Memory Blocks, and 1000-Slot Memory Blocks
is illustrated below.
Memory Parcel
Called
0
Number
1
9
MEMORY ALLOCATION FOR SPEED CALLING-STATION
(STATION SPEED DIALING)
10-Slot Memory Block
00
01
99
– 525 –
1000-Slot Memory Block
0
4000
Memory
Parcels
3
4
6000
Memory
Parcels
9
Continued on next page
NWA-008844-001 Rev.5.0
CM73
91ch3005.fm