NEC Univerge NEAX 2000 IPS Command Manual page 452

COMMAND CODE TITLE:
42
NOTE 1: Initial Data in the DATA TABLE represents the value for the data "NONE". In this case, the
following conversion is performed in the Deluxe Traveling Class Mark-CCIS.
(1) 2400 IPX to 2000 IPS
2400 IPX
TRK RESTRICTION CLASS
0: OG via ATT
1: Unrestricted-1
2: Unrestricted-2
3: Non-Restricted
4: Semi-Restricted
5: Restricted
6: Fully-Restricted
7:
8:
Not Defined
15:
(2) 2000 IPS to 2400 IPX
2000 IPS
TRK RESTRICTION CLASS
1: Unrestricted (RCA)
2: Non-Unrestricted-1 (RCB)
3: Non-Restricted-2 (RCC)
4: Semi-Restricted-1 (RCD)
5: Semi-Restricted-2 (RCE)
6: Restricted-1 (RCF)
7: Restricted-2 (RCG)
8: Fully-Restricted (RCH)
NOTE 2: This command should be used when changing the initial setting shown above, or when receiv-
ing the 2400 IPX Trunk Restriction Class (9-15) as a Deluxe Travelling Class Mark.
TRUNK RESTRICTION CLASS CONVERSION
2000 IPS
TRK RESTRICTION CLASS
1: Unrestricted (RCA)
1: Unrestricted (RCA)
2: Non-Restricted-1 (RCB)
3: Non-Restricted-2 (RCC)
4: Semi-Restricted-1 (RCD)
5: Semi-Restricted-2 (RCE)
6: Restricted-1 (RCF)
7: Restricted-2 (RCG)
8: Fully-Restricted (RCH)
2400 IPX
TRK RESTRICTION CLASS
1: Unrestricted-1
2: Unrestricted-2
3: Non-Restricted
4: Semi-Restricted
5: Restricted
6: Fully-Restricted
7:
Not Defined
8:
– 428 –
CM42
NWA-008844-001 Rev.5.0
91ch3004.fm