NEC Univerge NEAX 2000 IPS Command Manual page 784

COMMAND CODE TITLE:
EA
Y : Reset Time
01-12: Month
01-30: Date
01-24: Hour
00-59: Minute
00-59: Second
Z : Trunk No. (000-511): 00 80 (Trunk No. 000) - FF81 (Trunk No. 511) [Hexadecimal display]
Although Trunk No. is displayed by hexadecimal (XX 8X), information-1 (XX) implies lower
2 digits of the Trunk No., and lower X of information-2 (8X) implies first digit of the Trunk No.
(XXX).
(example: in case Trunk No. is 001, 0180 is displayed.)
aa : Connection Status
1: Call from a station
2: Termination to a station
3: Call with tandem connection
4: Termination with tandem connection
bb : Connecting Terminal Information
When a station line is connected to the terminal (Connection Status=1/2):
X-XXXXXXXX (Station No.) [Decimal display]
When a trunk line is connected to the terminal (Connection Status=3/4):
Display the Route No. (00-63) + Trunk No. (000-511).
Route No.: 00 (Route No. 00) - 3F (Route No. 63) [Hexadecimal display]
Trunk No.: same as
(example: in case Route No. is 11 and Trunk No. is 020, "0B 14 80" is displayed.)
cc : Called Party No.
For outgoing call (Connection Status=1):
X-XXXXXXX (Dial No. [12 digits maximum]) [Decimal display]
For incoming call (Connection Status=2):
X-XXXXXXX (Calling Party No. [12 digits maximum]) [Decimal display]
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
Z
– 760 –
CMEA
NWA-008844-001 Rev.5.0
91ch3008.fm
JUNE/01/2007