NEC Univerge NEAX 2000 IPS Command Manual page 348

COMMAND CODE TITLE:
30
Y
No. MEANING
30 Handling of busy/not available
Automated Attendant/Remote
Access to System
(DISA) destination in Day Mode
31 Handling of busy/not available
Automated Attendant/Remote
Access to System (DISA) desti-
nation in Night Mode
NOTE 1:
For Remote Access to System (DISA), CM30 Y=30, 31 are effective only for a station call.
NOTE 2:
When providing a Night Message for Automated Attendant, the 2nd Answering Message
which is assigned by CM49 Y=00 2nd data 02XX is used for the Night Message. In that case,
the 2nd data 08 of CM30 Y=30, 31 cannot be assigned for handling of Busy/Not Available
Automated Attendant destination.
TRUNK DATA
DATA
00
01
03
04
NOTE 1 05
NOTE 2 06
08
15
00
15
NOTE 1
NOTE 2
SETTING DATA
MEANING
C.O. line release
Forward to TAS indicator
Forward to Attendant Console
Forward to DIT station
Music + DT connection for Redial
DT connection for Redial
Automated Attendant:
2nd Answering message + DT connec-
tion for Redial or
Remote Access to System (DISA):
C.O. line release
C.O. line release
Same as CM30 Y=30
– 324 –
CM30
: Initial Data
RELATED
COMMAND
CM41 Y=0>34
CM45
CM30 Y=04, 05
CM49 Y=02
CM48 Y=2
Same as CM30
Y=30
Continued on next page
NWA-008844-001 Rev.5.0
91ch3003.fm