NEC Univerge NEAX 2000 IPS Command Manual page 382

COMMAND CODE TITLE:
35
Y
No. MEANING
66 Restriction of incoming
connection to station
(Restricted-1) (RCF)
67 Restriction of incoming
connection to station
(Restricted-2) (RCG)
68 Restriction of incoming
connection to station
(Fully-Restricted) (RCH)
69 Announcement service
group 0
70 Announcement service
group 1
71 Announcement service
group 2
72 Announcement service
group 3
73 Announcement service
group 4
74 Attendant Delay Announce-
ment
75 DID incoming LDN display
term
on D /ATTCON/
DESKCON
76 Designation of Area Code
Development Pattern No. for
Toll Restriction
Analysis, and Maximum
Digit Analysis.
TRUNK ROUTE DATA
DATA
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Restricted
1 Allow
0 Allow
1 Restricted
0 Available
1 Not available (Trunk ID code assigned by
CM30 Y=19 is displayed.)
NOTE 1:
NOTE 2:
00 Area Code Development Pattern No. 0
07 Area Code Development Pattern No. 7
15 Not used
SETTING DATA
MEANING
Up to 4 digits LDN is available.
The DID incoming LDN is displayed
irrespective of any digit conversion
by CM76.
– 358 –
CM35
: Initial Data
RELATED
COMMAND
CM12 Y=01
CM20>A103-
A109
CM49
Y=00>04XX
CM15
Y=034-039
CM49
Y=00, 0A
CM30 Y=19
CM8A
Y=4000-4007
CM85 Y=0-7
Continued on next page
NWA-008844-001 Rev.5.0
91ch3003.fm